However, thorough testing and use of this product throughout the world for many years indicates that it is highly durable when used in vertical installations as described in the applicable 3M Product and Instruction Bulletins.

Indoor applications of DI-NOC^TM Architectural Finishes have an expected durability of twelve (12) years while outdoor applications have an expected durability of four (4)*.

*Climate specific

4. Can DI-NOC^TM finishes be installed outside?
Yes, certain DI-NOC^TM finishes can be installed outdoors on vertical surfaces. Although water does not penetrate DI-NOC^TM finishes, if the substrate is porous or if the film's edges are not properly seated, water can permeate under the film and cause delamination. Be sure to choose a non-porous substrate and seal the film's edges with a silicone sealer.

5. Can DI-NOC^TM finishes be installed to glass?
Yes! However, if the glass is exposed to direct sunlight, there is the possibility of glass breakage due to thermal expansion. Lighter colors are less likely to cause glass breakage than darker colors.

6. Who can provide installation training?
IDS can furnish training at its headquarters or onsite for an appropriate fee.

7. How do I clean DI-NOC^TM finishes?
DI-NOC^TM finishes can be cleaned with commercially available synthetic detergents and a soft cloth or sponge. Do not use abrasive materials and be sure to rinse off all detergent.

8. Can I print digital images / fonts on DI-NOC^TM finishes?
Yes! DI-NOC finishes can be fed through a digital printer.

9. Can DI-NOC^TM finishes be applied to MDF Board?
Absolutely! MDF Board can be used to cover textured / porous substrates or to add a three dimensional effect.

10. Can you apply DI-NOC^TM finishes to curved or three dimensional surfaces?
Yes! DI-NOC^TM finishes can be thermoformed to adhere to curved / three dimensional surfaces such as tables, chairs, etc.

11. Does vinyl increase the presence of mold and mildew on or behind walls?
No! Mold and mildew grow in damp, dark, and poorly ventilated areas and can grow behind any wall covering. The problem is caused by moisture and not vinyl. Please note that some DI-NOC^TM finishes have anti-bacterial coatings.

12. Can DI-NOC^TM finishes be seamed?
Absolutely! And when professionally installed, the seam will barely be noticeable.

13. Are DI-NOC^TM finishes removable or not?
The product can be removed from certain surfaces with heat and cleaners, but it is not an easy process nor is it normally recommended.

14. How are DI-NOC^TM finishes produced?
The patterns are normally printed onto the film and then a protective layer is applied with an embossed surface.

15. Can it be thermoformed?
Yes, very nicely.

16. Can it be piezo printed?
Yes, in some instances

17. Is it possible to produce special patterns?
Yes, special patterns can be produced with the absolute minimum quantity being 1,000 linear meters. Whether a special pattern can be considered depends in part on the complexity of the pattern.

18. Is the product anti-graffiti?
No, this is PVC film.

19. Which films have anti-bacterial treatment?
PS Series

20. Can I apply a layer of one DI-NOC^TM finish on top of another or do I need to remove the first layer first?
Yes, DI-NOC^TM finishes can be applied on top of one another. It is not recommended to apply more than three layers though.

21. Do DI-NOC^TM finishes contain latex?
No. DI-NOC^TM finishes are latex-free.

22. What is a butt joint?
A butt joint is where two pieces of film are applied with their respective edges butted together edge to edge.

23. Will DI-NOC^TM finishes damage my car's paint in the event that I remove it?
Anything that adheres to a car, such as a bumper sticker or vinyl logo, can damage your car's paint in the event of removal. Older paint is more susceptible to damage while new paint that has cured is less susceptible.